Tin Doughnut Cutter BDC05 An early tin doughnut cutter with a 3/8" strap handle. The diameter of this cutter is 2¾". the doughnut hole is soldered to a thin center strip of tin.
	Doughnut Cutter BDC06 $6.96 An early tin doughnut cutter with a ½" strap handle.  This handle is showing a little extra character.  This is a nice clean specimen with a good clean interior.  The diameter of this cutter is 2-7/8".
	Biscuit Cutter BDC07 $4.95 A simple tin biscuit/cookie cutter with a 5/8" strap handle in good condition.  The diameter of this cutter is 2½".
	Biscuit Cutter BDC08 $5.95 An early tin biscuit cutter with a ½" strap handle.  This cutter has a diameter of 2" and the cutter has a depth of 1½"

	Biscuit Cutter BDC01 A nice, nested set of 10 biscuit cutters in very good condition.  Cutters range in size from 3" to a tiny 5/8".  They all fit in a nice covered tin.
	Rumford Biscuit Cutter BDC02 A hard to find Rumford biscuit cutter in very good condition. This specimen is the slope shouldered model and has a cutter diameter of 2" with a height of 3¾".
	Rumford Biscuit Cutter BDC03 A Rumford biscuit cutter in very good condition. This specimen is embossed with the Rumford name as well as the script yeast powder. The cutter has a diameter of 2" with a height of 4".
	Combination Biscuit and Doughnut Cutter BDC04 A combination biscuit and doughnut cutter with an adjustable handle. The inner "doughnut hole" can be reversed to either side. A combination of one crimped edge and one even edge allows varied combinations.

	Biscuit Cutter BDC09 $5.95 An early tin biscuit cutter with a strap handle of 3/8".  This cutter has a diameter of 2" and a depth of 1½".
	Biscuit Cutter BDC10 $4.95 A biscuit cutter with a strap handle of ½".  This cutter has a diameter of 1½" and a depth of 1½".
	Biscuit Cutter BDC11 $5.95 An early tin cutter with a strap handle of 3/8".  This cutter has a diameter of 2½" and a depth of 1½".
	Biscuit Cutter BDC12 $14.95 A wonderful early tin biscuit/cookie cutter with a 3/8" strap handle and star punch out on the top.  This cutter has a diameter of 3-1/8" with a depth of 1½".

	Biscuit Cutter - Wooden Handle BDC13 Aluminum biscuit cutter with a nice wooden handle. Every kitchen drawer should have one or two of these as they are nice cookie cuuters too. This specimen has a cutter depth of 3/4".
	Biscuit Cutter - Ripple Edge BDC14 An attractive biscuit or cookie of darkened tin. This specimen has a rippled edge and a strap handle with a width of 3/4". All solder joints are sound. The depth of the cutter is 3/4".
	Doughnut Cutter BDC15 A doughnut cutter - heavy darkened tin. This specimen is unique in the way the doughnut hole is soldered into place by using three braces to suspend the hole. All solders are sound too. This cutter has a depth of 1 1/2" and a strap handle with a width of 5/8". A great addition to any vintage cutter collection.
	Biscuit or Cookie Cutter BDC16 A biscuit/cookie cutter of darkened tin. This specimen has a domed top and a strap width of 3/4". The strap is nicely finished with a rolled over edge. The cutter depth is 1".

	Biscuit or Cookie Cutter BDC17 A biscuit/cookie cutter of darkened tin. This specimen has a domed top and a strap width of 1/2". The strap is nicely finished with a rolled over edge and a raised center ridge. The cutter depth is 7/8". A nice little cutter that still retains a good percentage of it's bright tin finish.
	Doughnut Cutter BDC18 A doughnut cutter of darkened tin. This specimen has a domed top and a strap width of 5/8". The strap is nicely finished with a rolled over edge and a raised center ridge. The cutter depth is 1/2". A nice little cutter that still retains a good percentage of it's bright tin finish.
	Doughnut Cutter BDC19 A doughnut cutter of darkened tin. This specimen has a domed top and a strap width of 5/8". The strap is nicely finished with a rolled over edge. The cutter depth is 3/4". A nice little cutter to add to any collection.